有機涂料通過刮擦附著力粘合的標準試驗方法

Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

用長梁撓曲法測定三明治結構表面性能的標準試驗方法

Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure

有機發光二極管(OLED)一般照明光源 安全 一般要求和測試

Organic light emitting diode (OLED) Light sources for general lighting. Safety. General requirements and tests

用于普通照明的有機發光二極管 (OLED) 光源 安全 特殊要求 柔性 OLED 瓷磚和面板

Organic light emitting diode (OLED) light sources for general lighting. Safety - Particular requirements. Flexible OLED tiles and panels

用于室內家具用途的竹條層壓制品 要求及測試方法

Laminated products made of bamboo strips for indoor furniture purposes. Requirements and test methods

機床 主軸端部和工件夾具卡盤的連接尺寸 第1部分：錐形連接

Machine tools — Connecting dimensions of spindle noses and work holding chucks Part 1 : Conical connection

航空航天系列 電氣，矩形，模塊化連接器 工作溫度 175°C 連續 第027部分：用于 2 和 4 個模塊的機架和面板后部安裝插頭，系列 3 產品標準；英文版 prEN 4165-027:2023

Aerospace series - Connector, electrical, rectangular, modular - Operating temperature 175 ？C continuous - Part 027: Rack and panel rear mounted plug for 2 and 4 modules, series 3 - Product standard; English version prEN 4165-027:2023

電子設備機械結構 482.6mm(19in)系列機械結構尺寸 第3-100部分:面板、插箱、機箱、機架和機柜的基本尺寸

Mechanical structures for electronic equipment.Dimension of mechanical structures of the 482.6 mm (19 in) series.Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets

國際間遺體轉運 棺柩

International transfer of coffins

高度進制為44.45mm的窄柜基本尺寸系列

Series of basic dimension of narrow cabinets for vertical increment of 44.45mm

嵌入式電氣測量?jī)x器的面板安裝尺寸

Panel mounted equipment - Electrical measuring instruments - Dimensions for panel mounting

OLED光源通用照明安全 第一部分：一般要求和試驗方法

Organic light emitting diode (OLED) Light sources for general lighting - Safety -- Part 1: General requirements and tests

核電站 1E 級控制板、面板和機架的設計和鑒定 IEEE 標準

IEEE Standard for Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations

核電站 1E 級控制板、面板和機架的設計和鑒定 IEEE 標準

IEEE Standard for Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations

家用和類似用途插座用塑料件

Plastic parts for sockets for household and similar purposes

ARP6199B新變化的分析方法和原理

Analysis Methods and Rationale Used for New Changes in ARP6199B

根據 14 CFR 第25部分附錄 F，第 IV 和 V 部分的測試要求評估乘客和乘務員座椅的方法

Method to Evaluate Passenger and Flight Attendant Seats for the Test Requirements of 14 CFR Part 25 Appendix F, Parts IV and V

可繞金屬 測試方法 第17部分：剝離膜的附著性

Coil coated metals - Test methods - Part 17: Adhesion of strippable films

涂層金屬 試驗方法 第19部分：板件設計及大氣暴露測試

Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing

平板光伏組件和板的UL安全標準. 節/段落參考: 31.2.1.2主題: (第三版: 2002年3月15日)

UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - Section / Paragraph Reference: 31.2.1.2 Subject: (Edition 3: March 15@ 2002)