CSA C22.2 No.77-1995(R2013 具有固有過熱保護的電機

1. Scope 1.1 This Standard applies to ac and dc motors with inherent overheating protection designed to be used in accordance with the Canadian

Motors with Inherent Overheating Protection

CSA C22.2 No.77-1988 具有固有過熱保護的電機

1. Scope 1.1 This Standard applies to ac and dc motors with inherent overheating protection designed to be used in accordance with the Rules

Motors with Inherent Overheating Protection

CSA C22.2 No.77-1976 具有固有過熱保護的電機

Motors With Inherent Overheating Protection

CIE 230:2019 預測微小色差公式的有效性

CIE 230:2019 reports on the performance of colour-difference formulae based on the results of experiments to evaluate colour differences visually

Validity of Formulae for Predicting Small Colour Differences

JUS M.B0.250-1987 帶有三角形ISO．剖面的公制螺紋的公差．有間隙和無間隙的螺紋的限值和偏差

Toleran?es of metric screvv thread with triangular ISO-profile. Limit vaiues of deviations for threads vvith and without clearance

SIS SMS 1720-1958 UNF-螺紋，固定公差，等級1、2、3

UNF - thread, fixed tolerance, class 1, 2, 3

CB* 3326-1987 集裝箱導軌或緊固件間公差

本標準規定的公差，適用于船舶上裝載GB 1413-85《集裝箱外部尺寸和額定重量》標準中的1A、1AA、1C、1CC型集裝箱時的集裝箱導軌或與船體固定的集裝箱緊固件，且滿足我國鋼質海船規范(86年修改通報)、英國勞氏《對貨物集裝箱固縛裝置的指導規則》(81年)、西德勞氏《船上二集裝箱的裝載和固縛規則

Tolerance between container rails or fasteners

JJG(航天) 3-1982 931B有效值差分電壓表檢定規程

931B Verification Regulations for RMS Differential Voltmeter

CB 3326-1987 集裝箱導軌或緊固件間公差

Tolerance between container rails or fasteners

HB 6624-1992 緊固件連接孔軸線位置公差

本標準規定了同一圓面或同一圓柱表面上緊固件連接孔軸線位置公差。 　　本標準適用于連接孔有互換性要求的采用螺栓、螺釘?shù)染o固件連接零件。本標準不適用于沒有互換性要求和對連接件上的孔同時加工的零件

Fastener connection hole axis position tolerance

SIS SMS 1945-1969 螺柱．公差和帶有攻絲端的聯軸

Studs. Tolerances and locking of tap end

DIN ISO 2768-1:1991-06 一般公差；線性和角度尺寸的公差，沒有單獨的公差指示；與 ISO 2768-1:1989 相同

General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989

DIN 2769 E:2022-10 幾何產品規范（GPS） 一般公差 幾何公差和線性和角度尺寸公差的表格值 沒有單獨的公差指示

Dieses Dokument legt Allgemeintoleranzwerte in Toleranzklassen für allgemeine geometrische und dimensio-nelle Spezifikationen in Erg?nzung zu DIN EN

Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

GB/T 3103.4-1992 緊固件公差 耐熱用螺紋連接副

本標準規定了螺紋規格為M12～180×6、產品等級為TA、TB和TC級的等長雙頭螺柱、雙頭螺柱、六角頭螺栓、六角法蘭面螺栓、六角螺母、罩螺母及公稱直徑dw＝21～270的受力套管的公差及表面粗糙度。 本標準適用于既能承受高溫、交變載荷，又要在相當大的程度上保持預緊力和耐疲勞強度的工況

Tolerances for fasteners.Components for bolted connections made mainly from materials with a high temperture strength

CSA C22.2 No.77-14:2014 具有固有過熱保護功能的電機

1 Scope 1.1 This Standard applies to ac and dc motors with inherent overheating protection designed to be used in accordance with the Canadian

Motors with inherent overheating protection