共找到 150 條與 失效 相關的標準，共 10 頁
The guideline describes failures, which may result from thermal stresses. It also discusses the effects due to pure temperature influences and effects
Damage analysis — Damage caused by thermal stress
Schadensanalyse - Schaeden an geschweissten Metallprodukten
This guideline deals with failures due to corrosion that occur in, for the most part, aqueous electrolytes at temperatures generally below
Damage analysis — Damage caused by corrosion in electrolytes
Schadensanalyse - Schaeden durch Korrosion in Elektrolyten
本標準規定了機械產品金屬失效分析的基本術語及在斷裂、腐蝕、磨損、變形等失效分析中常用術語。 本標準適用于失效分析專業領域，供其制定標準、指導性技術文件、出版教材與著作、編寫報告等使用
Terminology for failure analysis of mechanical products - metal failure analysis
This standard lists failures cause by types of tribological stress. GFT-Arbeitsblatt 7 defines this as the stress acting on the surface of a solid
Damage analysis — Damage to metal products caused by tribological stresses
Schadensanalyse - Schaeden an Metallprodukten durch tribologische Beanspruchungen
This standard deals with failures due to corrosion that occur in@ for the most part@ aqueous electrolytes at temperatures generally below
Damage analysis — Damage to metal products caused by corrosion in aqueous media
Patterns of O-Ring Failures
此處提供的信息通過文本和插圖描述了O形圈失效的常見模式。指出了可能的原因和糾正措施以緩解問題。 目的 本文檔旨在提供一個指南，用于分析失效的O形圈以糾正導致失效的情況。通過仔細觀察失效的O形圈，可以學到很多關于解決涉及O形圈的密封問題的知識
Patterns of O-Ring Failures
The information presented herein describes the commonly observed patterns of O-ring failure by means of both text and illustration. Possible causes
PATTERNS OF O-RING FAILURES
Failure of Welds at Elevated Temperatures
The guideline specifies the commonly used methods for failure analysis of plastic products, outlines their operational principles and uses examples
Damage analysis — Important instrumental analysis methods for damage analysis of plastic products
This information sheet describes many of theways in which gear teeth can fail and recommends methods for reducing gear failures. It provides basic
Mechanisms of Gear Tooth Failures
本標準規定了圓周速度υ≤20m/s的重載（用于傳遞動力）齒輪的磨損、點蝕、剝落、膠合、塑變、折斷與裂紋的失效判據。 本標準主要用于判斷經運轉并已出現損傷的重載齒輪是否達到失效的程度。 本標準不適用于可靠度、振動或噪聲有特殊要求的重載齒輪的失效判據，也不適用于重載齒輪制造和
Heavy duty gear Invalidation criterion
