食物鏈微生物學 方法驗證 第3部分：在單個實驗室中驗證參考方法和經過驗證的替代方法的協議（ISO 16140-3:2021MOD）

Microbiology of the food chain — Method validation, Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory (ISO 16140-3:2021, MOD)

環境空氣采樣和分析方法 方法 9.17：環境顆粒物監測方法的等效性證明

Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods

經驗推導的多變量校準的驗證標準實踐

Standard Practice for Validation of Empirically Derived Multivariate Calibrations

跟蹤更改 液體石油產品 大氣壓下蒸餾特性的測定 微蒸餾

Tracked Changes. Liquid petroleum products. Determination of distillation characteristics at atmospheric pressure. Micro-distillation

骨料化學性能試驗 第1部分：化學分析

Tests for chemical properties of aggregates Part 1 : Chemical analysis

玉米 水分含量的測定（磨碎的谷物和全谷物）

Maize. Determination of moisture content (on milled grains and on whole grains)

空氣質量 固定源排放的測量 測量斷面、測量點、測量目標、計劃、報告要求（英標）

Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report (British Standard)

塑料 聚丙烯中二甲苯可溶物的測定

Plastics. Determination of xylene-soluble matter in polypropylene

固定源排放 自動測量系統的質量保證

Stationary source emissions. Quality assurance of automated measuring systems

固定源排放 標準化測量方法制定指南 結構和內容建議

Stationary source emissions – Guideline for the elaboration of standardized measurement methods – Recommendations for the structure and content

空氣質量 固定源排放測量 測量區段和地點以及測量目標、計劃和報告的要求

Air quality – Measurement of stationary source emissions – Requirements for measurement sections and sites and for the measurement objective, plan and report

固定源排放 自動測量系統的質量保證

Stationary source emissions – Quality assurance of automated measuring systems

食品快速檢測產品評價技術規范

Technical Specification for Evaluation of Rapid Food Testing Products

固定源排放 標準化測量方法制定指南 結構和內容建議

Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023

固定源排放 - 標準化測量方法制定指南 - 結構和內容建議

Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content; German version CEN/TR 17911:2023

空氣質量 空氣質量監測設備評估 第3部分：固定源排放連續監測用固定自動測量系統的性能標準和測試程序

Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources

液態石油產品 大氣壓下蒸餾特性的測定 微蒸餾

Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation; German version EN 17306:2023

液體石油產品-大氣壓下蒸餾特性的測定-微蒸餾

Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation; German version EN 17306:2023

土壤和廢棄物 篩選方法的選擇和應用指南（ISO/DIS 12404:2020）

Soil and waste - Guidance on the selection and application of screening methods (ISO/DIS 12404:2020); German and English version prEN ISO 12404:2020

實驗室醫學檢查和體外診斷系統傳染性病原體的敏感性測試和抗菌藥物敏感性測試裝置的評估 第2部分：與微量肉湯稀釋參考方法相比 評估抗菌藥物敏感性測試的測試系統的性能（草案）

Laboratory medicine examination and in vitro diagnostic systems Susceptibility testing of infectious pathogens and evaluation of antimicrobial susceptibility testing devices Part 2: Evaluating the performance of test systems for antimicrobial susceptibili

無創血壓計 第3部分：連續自動測量型的臨床研究（草案）

Non-invasive sphygmomanometer Part 3: Clinical study of continuous automatic measurement type (draft)

無創血壓計-第3部分：連續自動測量型臨床研究（ISO/DIS 81060-3:2019）

Non-invasive sphygmomanometers - Part 3: Clinical investigation of continuous automated measurement type (ISO/DIS 81060-3:2019); German and English version prEN ISO 81060-3:2019

塑料 乙烯/乙酸乙烯酯共聚物（EVAC）熱塑性塑料 乙酸乙烯酯含量的測定（ISO/DIS 8985:2020）

Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO/DIS 8985:2020); German and English version prEN ISO 8985:2020

化妝品微生物學評價化妝品的抗微生物保護

Cosmetics — Microbiology — Evaluation of the antimicrobial protection of a cosmetic product

土壤質量.篩選法的選擇和應用指南

Soil and waste - Guidance on the selection and application of screening methods

空氣質量.固定源排放的測量.測量部分和地點以及測量目標、計劃和報告的要求

Air quality — Measurement of stationary source emissions — Requirements for measurement sections and sites and for the measurement objective, plan and report

食品鏈微生物學.方法驗證.第4部分:單一實驗室方法驗證規程

Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory

食品鏈微生物學.方法驗證.第5部分:非專利方法的析因?qū)嶒?yàn)室間驗證規程

Microbiology of the food chain — Method validation — Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods

食品鏈的微生物學 - 方法驗證 - 第6部分:驗證微生物確認和打字的替代（專有）方法的協議

Microbiology of the food chain — Method validation — Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures

固定源排放.自動測量系統的質量保證

Stationary source emissions — Quality assurance of automated measuring systems

從醫療保健部門測量人體運動的各種傳感器系統中提取的步行速度驗證協議

Validation protocol for walking speed as extracted from various sensor systems that measure human body motion for the healthcare sector

塑料.乙烯/醋酸乙烯酯共聚物（EVAC）熱塑性塑料.醋酸乙烯酯含量的測定

Plastics — Ethylene/vinyl acetate copolymer (EVAC) thermoplastics — Determination of vinyl acetate content

油料作物——近紅外光譜法的應用

Oilseeds — Application of near infrared spectrometry

液體石油產品 常壓下蒸餾特性的測定 微蒸餾

Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation

液體石油產品 常壓下蒸餾特性的測定 微蒸餾

Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation

固定源排放 制定標準化測量方法的指南 結構和內容的建議

Stationary source emissions. Guideline for the elaboration of standardized measurement methods. Recommendations for the structure and content

固定源排放 多種氣態物質質量濃度的測定 傅里葉變換紅外光譜

Stationary source emissions - Determination of mass concentration of multiple gaseous species - Fourier transform infrared spectroscopy

固定源排放甲醛質量濃度的手動測定方法參考方法

Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method

進出口食品化妝品專業分析方法驗證指南 第3部分：傳統微生物學方法

Validation Guidelines for Professional Analytical Methods for Imported and Exported Food and Cosmetics Part 3: Traditional Microbiological Methods

液態石油產品 在大氣壓下測定餾程特性 微餾法

Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation

食品鏈微生物學 方法驗證 第6部分：替代（專有）微生物確認和分型程序驗證的協議（ISO 16140-6:2019）

Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)

固定源排放 標準化測量方法制定指南 結構和內容建議

Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content (Endorsed by Asociación Espa?ola de Normalización in March of 2023.)

空氣質量 空氣質量監測設備的評估 第3部分：固定自動測量系統的性能標準和測試程序 用于連續監控固定源排放

Air quality - Assessment of air quality monitoring equipment - Part 3: Performance criteria and test procedures for stationary automated measuring systems for continuous monitoring of emissions from stationary sources

食物鏈微生物學 方法驗證 第6部分：微生物確認和分型程序替代（專有）方法驗證協議

Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)

固定源排放 標準化測量方法制定指南 結構和內容的建議

Stationary source emissions - Guideline for the elaboration of standardized measurement methods - Recommendations for the structure and content

液體石油產品 常壓下蒸餾特性的測定 微蒸餾

Liquid petroleum products - Determination of distillation characteristics at atmospheric pressure - Micro-distillation

固定污染源排放 自動測量系統的質量保證

Stationary source emissions - Quality assurance of automated measuring systems

臨床實驗室檢測和體外診斷系統 感染病原體敏感性試驗與抗微生物藥物敏感性試驗設備的性能評價 第2部分：與肉湯微量稀釋參考方法比對的抗微生物藥物敏感性試驗設備性能評價

Clinical laboratory testing and in vitro diagnostic systems - Performance evaluation of equipment for infectious pathogen susceptibility testing and antimicrobial susceptibility testing - Part 2: Performance evaluation of equipment for antimicrobial susce

游離甲狀腺素測定試劑盒

Free thyroxine determination kit