Viscosity test method for plastics

Viscosity test method for plastics, Total:415 items.

In the international standard classification, Viscosity test method for plastics involves: Rubber and plastics products, Plastics, Measurement of volume, mass, density, viscosity, Refractories, Adhesives, Paints and varnishes, Road engineering, Products of the textile industry, Waxes, bituminous materials and other petroleum products, Cans. Tins. Tubes, Reinforced plastics, Cutting tools, Chipless working equipment, Road vehicle systems, Protection against fire, Inks. Printing inks, Construction materials, Cellular materials, Lubricants, industrial oils and related products, Raw materials for rubber and plastics, Surface treatment and coating, Sacks. Bags, Glass, Structures of buildings, Petroleum products in general, Particle size analysis. Sieving.

Standard Association of Australia （SAA）, Viscosity test method for plastics

AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittings - Method for determination of bond strength
AS/NZS 1462.21:1997 Methods of test for plastics pipes and fittings - Method for determination of bond strength
AS 4878.8:2001 Methods of test for coated fabrics - Determination of coating adhesion
AS/NZS 3572.22:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of hardness by means of a Barcol impressor
AS/NZS 1462.22:2023 Methods of test for plastics pipes and fittings, Method 22: Thermoplastics pipes — Determination of ring stiffness (ISO 9969:2016, IDT)
AS 1580.214.3:2003(R2013) Test Methods for Paints and Related Materials Viscosity Cone and Plate Method
AS 2498.4:1993 Methods of testing rigid cellular plastics - Determination of cross-breaking strength
AS/NZS 3572.24:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial hoop tensile strength by means of a tensile plate test
AS/NZS 1580.214.6:1995 Paints and related materials - Methods of test - Consistency - ISO flow cups
AS/NZS 3572.23:1997 Plastics - Glass filament reinforced plastics (GRP) - Methods of test - Method for the determination of the initial longitudinal tensile strength by means of a tensile plate test
AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS/NZS 1580.214.5:1997 Paints and related materials - Methods of test - Consistency - Rotational viscometer

SCC, Viscosity test method for plastics

BS 2782-7 METHOD 730A:1979 Methods of testing plastics. Rheological properties-Determination of reduced viscosity (viscosity number) and intrinsic viscosity of plastics in dilute solution
BS 2782-4:1958 Methods of testing plastics. Analytical methods and viscosity solution
BS 2782-7 METHOD 733A:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number of polyamides
BS 2782-2 METHOD 332A:1976 Methods of testing plastics. Stiffness of plastics film
BS 2782-7 METHOD 732A:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number:general conditions
AS K94.4:1962 Methods of testing plastics, Part 4: Analytical methods and viscosity in solution
DIN EN 16284 E:2011 Draft Document - Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane; German version prEN 16284:2011
DANSK DS/EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
NS-EN 16284:2013 Packaging — Flexible laminate and plastic tubes — Test method to determine the adhesive strength of the membrane
BS 5350-B8:1977 Methods of test for adhesives-Determination of viscosity
BS 2782-1 METHODS 120A TO 120E:1976 Methods of testing plastics. Thermal properties-Determination of the Vicat softening temperature of thermoplastics
BS 2782-7 METHOD 732D:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number of polycarbonate moulding and extrusion materials
BS 2782-3 METHOD 308 TO 310:1957 Methods of testing plastics. Methods 308, 309 and 310 tear strength, stiffness in bend at normal temperature and adhesion effects
BS EN ISO 307:1998 Plastics. Polyamides. Determination of viscosity number
DANSK DS/EN ISO 307/A1:2007 Plastics – Polyamides – Determination of viscosity number
BS 2782-7 METHOD 732E:1991 Methods of testing plastics. Rheological properties-Determination of viscosity number of poly(alkylene terephthalates)
BS 2782-3 METHOD 365D:1978 Methods of testing plastics. Mechanical properties-Determination of hardness of plastics and ebonite by the ball indentation method
BS 2782-1 METHOD 121C:1992 Methods of testing plastics. Thermal properties-Determination of temperature of deflection under a bending stress for rigid thermosetting resin bonded laminated plastics sheet
AS 3572.10:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 10: Determination of the initial ring stiffness of glass filament reinforced plastics pipes
11/30244254 DC BS EN 16284. Packaging. Flexible laminate and plastic tubes. Test method to determine the adhesive strength of the membrane
AS 3572.8:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 8: Determination of long-term ring stiffness of glass filament reinforced plastics pipes
BS 2782-1:1956 Methods of testing plastics. Effect of temperature
BS 2782-6 METHODS 620C AND 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics
BS 2782 INTRODUCTION:1975 Methods of testing plastics
BS 2782-5:1958 Methods of testing plastics. Miscellaneous methods
AS 1193:1989 Plastics - Methods for determining the density and relative density of non-cellular plastics
BS 2782-6 METHODS 620A TO 620D:1980 Methods of testing plastics. Dimensional properties-Determination of density of solid plastics excluding cellular plastics (immersion method). Determination of density of solid plastics excluding cellular plastics (pyknometer method). Determination of ...
BS 2782:1965 Methods of testing plastics
BS 2782:1970 Methods of testing plastics
AS 2888.6:1986 Methods of testing plastics waste outlets, Method 6: Method for load testing of plastics waste outlets
DANSK DS/ISO 1183-2:2019 Plastics – Methods for determining the density of non-cellular plastics – Part 2: Density gradient column method
BS 2782-1 METHOD 120C:1990 Methods of testing plastics. Thermal properties-Determination of the 1/10 Vicat softening temperature of thermoplastics
BS 2782-3 METHODS 326A TO 326C:1977 Methods of testing plastics. Mechanical properties-Determination of tensile strength and elongation of plastics films
AS 2888.10:1986 Methods of testing plastics waste fittings, Method 10: Method for leak testing plastics pan connectors
NS 9510:1985 Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
AS Z24.3.3:1968 Methods of test for pressure sensitive adhesive tapes, Method 3.3: Adhesion strength - Quickstick
BS 3900-A7.1:2000 Methods of test for paints. Tests on liquid paints (excluding chemical tests). Determination of the viscosity of paint at a high rate of shear. Cone and plate viscometer. Section A7-1: Cone and plate viscometer
AENOR UNE-EN 28659:1992 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:1989)
BS 2782-1 METHOD 150A:1976 Methods of testing plastics. Thermal properties-Determination of stiffness in torsion as a function of temperature
DANSK DS/EN 13892-8:2003 Methods of test for screed materials - Part 8: Determination of bond strength
DANSK DS/EN ISO 9653:2000 Adhesives - Test method for shear impact strength of adhesive bonds
NS-EN 13892-8:2002 Methods of test for screed materials — Part 8: Determination of bond strength
AS 3572.1:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 1: Preparation of glass filament reinforced plastics test specimens
BS 2782-9 METHOD 941:1990 Methods of testing plastics. Sampling and test specimen preparation-Determination of maximum reversion of amorphous thermoplastics moulding materials
BS 2782-5 METHOD 501:1958 Methods of testing plastics. Methods 501 apparent density and bulk factor of moulding materials
AS 3572.11:1989 Plastics - Glass filament reinforced plastics (GRP) - Methods of test, Method 11: Determination of the initial ring deflection of glass filament reinforced plastics pipes
AASHTO T 72-2010(2019) Standard Method of Test for Saybolt Viscosity

Malaysia Standards, Viscosity test method for plastics

MS 1505-2000 Method of test for determination of bond strength for flexible plastics laminates
MS 1504-2000 Method of test for determination of thickness for flexible plastics laminates

British Standards Institution (BSI), Viscosity test method for plastics

BS 2782-7 Method 732D:1999 Methods of testing plastics. Rheological properties. Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers. Method 732D: Determination of the viscosity of polycarbonate (PC)...
BS EN ISO 12058-1:2002 Plastics - 12058-1:2002) Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
BS EN ISO 12058-1:1997 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
BS EN ISO 12058-1:2018 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
BS 2782-7 Method 732B:1991 Methods of testing plastics - Rheological properties - Determination of viscosity number of poly(vinyl chloride) resins
BS 2782 Pt.7 Method 733A:1991 Methods of testing plastics. Rheological properties. Determination of viscosity number of polyamides
BS 2782-3-Method 323G:1997 Methods of testing plastics. Rheological properties. Determination of viscosity number of polyamides
BS 2782-6 Methods 620A to 620D:1991 Methods of testing plastics. Dimensional properties. Determination of density and relative density of non-cellular plastics. Methods 620A to 620D:Determination of density and relative density of non-cellular plastics
BS EN 16284:2013 Packaging. Flexible laminate and plastic tubes. Test method to determine the adhesive strength of the membrane
BS EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
BS EN ISO 15908:2002 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
BS EN ISO 1183-2:2019 Plastics. Methods for determining the density of non-cellular plastics. Density gradient column method
BS EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Density gradient column method
BS 2782-8 Method 825A:1996 Methods of testing plastics - Other properties - Film and sheeting - Determination of blocking resistance
BS EN 13892-8:2002 Methods of test for screed materials - Determination of bond strength
BS EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number
BS EN ISO 307:2007+A1:2013 Plastics - Polyamides - Determination of viscosity number
BS ISO 19095-3:2015 Plastics. Evaluation of the adhesion interface performance in plastic-metal assemblies. Test methods
BS 2782-6 Method 640A:1979 Methods of testing plastics. Dimensional properties. Determination of shrinkage of test specimens in the form of bars of compression moulded thermosetting moulding materials
BS ISO 15509:2019 Adhesives. Determination of the bond strength of engineering-plastic joints
BS 2782-1 Method 153A:1991 Methods of testing plastics. Thermal properties. Determination of stiffness in torsion of flexible materials (general method)
BS 2782-6 Method 632A:1993 Methods of testing plastics. Dimensional properties. Determination of length and width of flexible sheet
BS 7034-2:1988 Viscosity and viscometric fixed points of glass. Method for the determination of viscosity by rotation viscometers
BS ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints
BS EN 1052-5:2005 Methods of test for masonry - Determination of bond strength by the bond wrench method

NZ-SNZ, Viscosity test method for plastics

AS/NZS 3572.20:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 20: Method for the Determination of the Peel Strength of the Bond between Laminate Layers
AS/NZS 3572.21:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 21: Method for the Determination of the Shear Strength of a Sandwich Panel
AS/NZS 3572.19:1997 Plastics - Glass Filament Reinforced Plastics (GRP) - Methods of Test Method 19: Method for the Determination of the Lap Shear Strength of Laminate

Korean Agency for Technology and Standards (KATS), Viscosity test method for plastics

KS M 5452-1984 Testing methods for viscosity of paint
KS L 5503-1986 TESTING METHOD FOR REFRACTORINESS OF FIRECLAY PLASTIC REFRACTORIES
KS L 5503-1992(1997) TESTING METHOD FOR REFRACTORINESS OF FIRECLAY PLASTIC REFRACTORIES
KS F 2392-2019 Standard test method for viscosity determination of asphalt binder using rotational viscometer
KS M 3061-1993 Testing method for stiffness of plastics by means of a cantilever beam
KS M 3043-1985 TESTING METHODS FOR DUROMETER HARDNESS OF PLASTICS
KS M 3043-1990(2001) TESTING METHODS FOR DUROMETER HARDNESS OF PLASTICS
KS R 1070-2003 SHEAR STRENGTH TEST PROCEDURE FOR BRAKE SHOE ASSEMBLY AND PAD
KS M ISO 12058-1-2006(2021) Plastics?Determination of viscosity using a falling-ball viscometer－Part 1：Inclined-tube method
KS M ISO 12058-1-2006(2016) Plastics?Determination of viscosity using a falling-ball viscometer－Part 1：Inclined-tube method
KS F 2392-2014 Standard test method for viscosity determination of asphalt binder using rotational viscometer
KS M ISO 12058-1:2022 Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
KS F 2218-2020 Testing methods for bonding strength of wall boards adhesives
KS F 2218-1985 Testing methods for bonding strength of wall boards adhesives
KS L 6513-2001(2011) Testing methods for bonded abrasive grain size
KS M ISO 12058-1:2006 Plastics ? Determination of viscosity using a falling-ball viscometer－Part 1：Inclined-tube method
KS M ISO 1183-2006(2011) Plastics－Methods for determining the density and relative density of non-cellular plastics
KS M ISO 1183-2015 Plastics－Methods for determining the density and relative density of non-cellular plastics
KS M 3026-2021 Testing methods for yellowness index and change of yellowness index of plastics
KS M 3708-2002 Testing method for bearing strength of carbon fiber reinforced plastics
KS M ISO 15509:2020 Adhesives — Determination of the bond strength of engineering-plastic joints
KS M ISO 1183-2-2019 Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method
KS C 2006-2023 Testing method for ball pressure of thermoplastics
KS L 5505-2006(2016) Testing method for permanent linear change on high alumina and fireclay plastic refractories
KS M 3723-1987 Testing methods for flexural strength of adhesives
KS M 3050-1990(2001) TESTING METHODS FOR TRANSITION TEMPERATURES OF PLASTICS
KS L 5505-1986 Testing method for permanent linear change on high alumina and fireclay plastic refractories
KS M 3722-2015 Testing methods for tensile strength of adhesives
KS M 3019-1982 Testing methods for shear strength of plastics by punch tool
KS M 3037-1983(1998) METHOD ROCKWELL HARDNESS TEST FOR PLASTICS
KS L 5504-2006(2021) Testing method for crushing strength and modulus of rupture of high alumina and fireclay plastic refractories
KS M 3723-2003(2013) Testing methods for flexural strength of adhesives
KS F 2216-2000 TESTING METHODS FOR BONDING STRENGTH OF ANCHORING WOODEN BLOCK ADHESIVES
KS M 3072-2023 Testing method for colour fastness of plastics upon exposure to light of the carbon arc
KS M 3072-2008(2018) Testing method for colour fastness of plastics upon exposure to light of the carbon arc
KS M 3816-1982 TESTING METHOD FOR COMPRESSIVE PROPERTIES OF PLASTICS
KS M 3016-2011 Testing method of the density and specific gravity for plastics
KS M 3725-2005 TESTING METHODS FOR PEEL STRENGTH OF ADHESIVES
KS M 3080-1995(2001) TESTING METHOD FOR COLOUR FASTNESS OF PLASTICS UPON EXPOSURE TO LIGHT OF THE CARBON ARC
KS M 3037-1983 METHOD ROCKWELL HARDNESS TEST FOR PLASTICS
KS M 3019-2008 Testing methods for shear strength of plastics by punch tool
KS K 0741-2021 Standard test method for determining the bond strength of geocomposites

未注明發布機構, Viscosity test method for plastics

ASTM RR-D01-1155 2010 D4796-Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
AS/NZS 1462.22:1997
ASTM RR-D20-1194 2003 D1525-Test Method for Vicat Softening Temperature of Plastics
ASTM RR-D20-1123 1985 D1505-Test Method for Density of Plastics by the Density-Gradient Technique
ASTM RR-D20-1274 2019 D1929-Test Method for Determining Ignition Temperature of Plastics
ASTM RR-D20-1260 2013 D1929-Test Method for Determining Ignition Temperature of Plastics
AS 2498.4:1993(R2020) Methods of testing rigid cellular plastics - Determination of cross-breaking strength
ASTM RR-D20-1180 1993 D1003-Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM RR-D20-1105 1983 D1622-Test Method for Apparent Density of Rigid Cellular Plastics
ASTM RR-D04-1035 2011 D7496-Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
AS/NZS 1580.214.6:1995(R2013) Paints and related materials - Methods of test - Consistency - ISO flow cups
ASTM RR-D20-2007 2023 D4878-Test Method for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM RR-D04-1036 2011 D7496-Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
DIN EN ISO 307 E:2018-01 Determination of viscosity values of plastic polyamides (draft)
DIN EN ISO 8659 E:2019-05 Test method for fatigue strength of thermoplastic valves (draft)
AS/NZS 1580.214.1:1997(R2013) Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS/NZS 1580.214.5:1997(R2013) Paints and related materials - Methods of test - Consistency - Rotational viscometer

Japanese Industrial Standards Committee (JISC), Viscosity test method for plastics

JIS K 7215:1986 Testing methods for durometer hardness of plastics
JIS R 2573:1991 Testing method for refractoriness of fireclay plastic refractories
JIS K 7121:1987 Testing methods for transition temperatures of plastics
JIS K 7216:1980 Testing method for brittleness temperature of plastics
JIS R 6002:1998 Testing method for bonded abrasive grain size
JIS K 6848-4:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 4: Guidelines for the surface preparation of adherends excluded metals and plastics
JIS K 6848-3:1999 Adhesives -- Testing methods of bonding strength of adhesives -- Part 3: Guidelines for the surface preparation of plastics
JIS K 6933:2013 Plastics.Polyamides.Determination of viscosity number
JIS K 6933:1999 Plastics -- Polyamides -- Determination of viscosity number
JIS K 7106:1995 Testing method for stiffness of plastics by means of a cantilever beam
JIS K 6862:1984 Testing methods for melt viscosity of hot-melt adhesives
JIS R 2574:1991 Testing method for workability index of fireclay plastic
JIS K 7112:1999 Plastics -- Methods of determining the density and relative density of non-cellular plastics
JIS K 7112-2:2023 Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
JIS K 6848-2:2016 Adhesives -- Testing methods of bonding strength of adhesives -- Part 2: Guidelines for the surface preparation of metals and plastics prior to adhesive bonding
JIS K 7214:1985 Testing methods for shear strength of plastics by punch tool
JIS K 6404-5:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 5: Determination of coating adhesion
JIS K 7102:1981 Testing method for colour fastness of plastics upon exposure to light of the carbon arc
JIS K 7202:1995 Method of rockwell hardness test for plastics
JIS K 7122:1987 Testing methods for heat of transitions of plastics

American Society for Testing and Materials (ASTM), Viscosity test method for plastics

ASTM D5478-09 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-98 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-98(2003) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D1084-97 Standard Test Methods for Viscosity of Adhesives
ASTM D1084-97(2005) Standard Test Methods for Viscosity of Adhesives
ASTM D4796-88(2004) Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM D5478-13(2022) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D4796-88(1998) Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM D952-95 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D5478-13 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D952-02 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D5478-13(2018) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D1505-98e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1505-85(1990)e1 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1823-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D4796-17 Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D4796-17(2022) Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials
ASTM D1823-95(2009) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D3164-97 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D1505-03 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D4796-10 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
ASTM D3164M-03 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D4212-99 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D1929-19 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-20 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D4212-99(2005) Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D3164-03 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D1746-03 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1746-23 Standard Test Method for Transparency of Plastic Sheeting
ASTM D1200-10 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D1823-95 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D88-81(1987)e1 Standard Test Method for Saybolt Viscosity
ASTM D8162-20 Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
ASTM D1823-95(2001) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D4040-99 Standard Test Method for Viscosity of Printing Inks and Vehicles by the Falling-Rod Viscometer
ASTM D88-56(1968) Standard Method Of Test For Saybolt Viscosity
ASTM D1746-97 Standard Test Method for Transparency of Plastic Sheeting
ASTM D952-15(2021) Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D8162-20a Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
ASTM D4212-10 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D1200-94(2005) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D1622-98 Standard Test Method for Apparent Density of Rigid Cellular Plastics
ASTM D88-94(1999) Standard Test Method for Saybolt Viscosity
ASTM D1823-16 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D1824-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D88/D88M-07(2019)e1 Standard Test Method for Saybolt Viscosity
ASTM D1925-70(1988)e1 Test Method for Yellowness Index of Plastics
ASTM D3236-15(2021) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials
ASTM D562-81(1997)e1 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Visosity Using a Stormer-Type Viscometer
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D4989-90a(1999)e1 Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM D4989/D4989M-90a(2021) Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM D1824-95(2002) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D562-01 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D4287-00(2019) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D3205-86(1991) Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer
ASTM D562-01(2005) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
ASTM D1824-95 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D4212-16(2023) Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D562-10(2014) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
ASTM D3354-11 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D3354-96 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D1200-23 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D4878-08 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D3354-04 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique
ASTM D1505-68(1979) Standard Test Method for Density Of Plastics By The Density-Gradient Technique
ASTM D1746-09 Standard Test Method for Transparency of Plastic Sheeting
ASTM D562-10(2023) Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
ASTM D1043-99 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D3163-01(2023) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM C1823/C1823M-20 Standard Test Method for Shear Bond Strength of Adhered Dimension Stone
ASTM D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
ASTM D1043-16 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1043-09 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1200-10(2018) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D1929-16 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1003-92 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D5125-97 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D3846-02 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM F1080-93(2002) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
ASTM D1921-06e1 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1623-78(1995) Standard Test Method for Tensile And Tensile Adhesion Properties Of Rigid Cellular Plastics
ASTM D1790-08 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

RU-GOST R, Viscosity test method for plastics

GOST 18249-1972 Plastics. Method for viscosity determination of diluted polymer solution
GOST 17302-1971 Plastics. Method of test for shear strength
GOST 11279.3-1983 Organic dyes. Testing method of colour fastness to adhesives and plastificators
GOST 11262-1980 Plastics. Tensile strength test method
GOST 27319-1987 Thermoplastic materials. Method of determination of thermal bonding strength
GOST 3594.8-1977 Moulding clay. Method for the determination of durability
GOST 8420-1974 Paint and lacquer materials. Method for determination of relative viscosity
GOST 8420-1974(1989) Paint and lacquer materials. Method for determination of relative viscosity
GOST 26581-1985 Greases. Method of test for effective viscosity on a rotary viscosimeter
GOST R ISO 2411-2014 Textiles. Rubber- or plastics-coated fabrics. Method for determination of coating adhesion
GOST 28832-1990 Materials for interlinings with thermoplastic coating. Method for determination of bonding strength
GOST 15139-1969 Plastics. Methods for the determination of density (mass density)
GOST 15088-2014 Plastics. Method for determination of Vicat softening temperature of thermoplastics
GOST 1929-1987 Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter

Association Francaise de Normalisation, Viscosity test method for plastics

NF H34-083*NF EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
NF EN 16284:2013 Packaging - Flexible plastic tubes and flexible laminated tubes - Test method for determining the adhesion force of the membrane
NF T76-320*NF EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives
NF EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling ball viscometer - Part 1: inclined tube method
NF T51-173:2007 Plastics - Polyamides - Determination of viscosity number.
NF T51-439-1*NF EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method
NF T51-439-1:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1 : inclined-tube method.
NF EN ISO 2555:2018 Plastics - Resins in liquid state or in emulsions or dispersions - Determination of apparent viscosity by the single-cylinder rotary viscometer method
NF EN ISO 307:2019 Plastics - Polyamides - Determination of viscosity index
NF EN 13892-8:2003 Methods of testing screed materials - Part 8: determination of bond strength
NF T51-073:1977 Plastics. Reaction to fire.test method to measure the density of smoke.
NF T51-037-2*NF EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method
NF T51-037-2:2005 Plastics - Methods for determining the density of non-cellular plastics - Part 2 : density gradient column method.

SE-SIS, Viscosity test method for plastics

SIS 20 03 07 plastic. Test Methods. density
SIS 20 03 04 plastic. Test Methods. Deformation limit
SIS 20 03 03 plastic. Test Methods. Electrical impact strength

(U.S.) Ford Automotive Standards, Viscosity test method for plastics

FORD FLTM BO 101-06-2001 ADHESION STRENGTH OF COEXTRUDED BLOW MOLDED PLASTIC FUEL TANK MATERIAL BY T-PEEL TEST METHOD

German Institute for Standardization, Viscosity test method for plastics

DIN EN 16284:2013-05 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane; German version EN 16284:2013
DIN 53366:2007-10 Testing of plastic films and sheetings - Determination of blocking strength
DIN 53366:2007 Testing of plastic films and sheetings - Determination of blocking strength
DIN EN ISO 15908:2003 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002); German version EN ISO 15908:2002
DIN EN ISO 8659:2020-07 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020); German version EN ISO 8659:2020
DIN EN ISO 12058-1:2018-11 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018); German version EN ISO 12058-1:2018
DIN EN ISO 307:2019-11 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019); German version EN ISO 307:2019
DIN 55543-1:1986 Packaging test; test methods for plastic sacks; determination of the film thickness
DIN EN ISO 1183-2:2019-06 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019); German version EN ISO 1183-2:2019
DIN EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004); German version EN ISO 1183-2:2004
DIN EN ISO 1599:2000 Plastics - Cellulose acetate - Determination of viscosity loss on moulding (ISO 1599:1990); German version EN ISO 1599:1999

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Viscosity test method for plastics

GB/T 10247-1988 Methods for measurement and test of the viscosity
GB/T 16276-1996 Test method for blocking of plastic film
GB/T 13217.4-1991 Test method for viscosity of plastics gravure printing inks
GB/T 2913-1982 Test for whiteness of plastics
GB 2913-1982 Test method for whiteness of plastics
GB/T 9342-1988 Plastics--Determination of hardness by the ball indentation method
GB/T 2411-1980 Plastics--Shore hardness test
GB/T 14484-1993 Test method for bearing strength of plastics
GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test

Indonesia Standards, Viscosity test method for plastics

SNI 06-0427-1989 Plastic materials, Determination of bulk density
SNI 08-6329-2000 Test methods for adhesive strength of backing of textile floor covering
SNI 06-6440-2000 Test methods for viscosity of asphalts by vacuum capillary viscometer

European Committee for Standardization (CEN), Viscosity test method for plastics

EN ISO 15908:2002 Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives ISO 15908: 2002
EN ISO 307:2003 Plastics - Polyamides - Determination of viscosity number ISO 307: 2003
EN ISO 307:2007 Plastics - Polyamides - Determination of viscosity number (ISO 307:2007)
EN ISO 307:1997 Plastics - Polyamides - Determination of Viscosity Number ISO 307: 1994
EN ISO 307:2019 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019)
EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
EN ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
EN ISO 1157:1999 Plastics - Cellulose Acetate in Dilute Solution - Determination of Viscosity Number and Viscosity Ratio ISO 1157: 1990

GM Daewoo, Viscosity test method for plastics

GMKOREA EDS-T-7713-2012 Method of Testing the Adhesion Strength of Adhesives ???? ???? ???? Version 3; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3371 [Replaced: GMKOREA EDS-T-7713]
GMKOREA EDS-T-7652-2011 Test Method for Determining the Discoloration Resistance of Plastic Film Adhesives
GMKOREA EDS-T-7523-2011 Test Method for the Pencil Hardness of Plastics

IN-BIS, Viscosity test method for plastics

IS 1206 Pt.1-1978 Methods for testing tar and bituminous materials: Determination of viscosity Part I Industrial Viscosity
IS 1206 Pt.2-1978 Methods for testing tar and bituminous materials: Determination of viscosity Part II Absolute viscosity
IS 1206 Pt.3-1978 Methods of testing tar and bituminous materials: Determination of viscosity Part III Kinematic viscosity

CZ-CSN, Viscosity test method for plastics

CSN 64 0348-1982 Plastice. Determination of viscosity b? eans of the Hoppler-Viscosimeter
CSN 64 0349-1982 Plastics. Determination of viscosity by means of the Hoppler reoviscosimeter
CSN 67 3016-1981 Paints and varnishes. Test method of viscosity by rotatory viscometer
CSN 26 9308-1983 Plastic crates. Testing method of fixed handle strenght

Danish Standards Foundation, Viscosity test method for plastics

DS/EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
DS/EN ISO 12058-1:2002 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
DS/EN ISO 12058-1/AC:2004 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
DS/EN ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method

AENOR, Viscosity test method for plastics

UNE-EN 16284:2013 Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
UNE-EN 28659:1992 THERMOPLASTICS VALVES. FATIGUE STRENGTH. TEST METHOD. (ISO 8659:1989)
UNE-EN 13892-8:2003 Methods of test for screed materials - Part 8: Determination of bond strength

GSO, Viscosity test method for plastics

GSO ISO 12058-1:2015 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
BH GSO ISO 12058-1:2016 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
OS GSO ISO 12058-1:2015 Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
OS GSO ASTM D2457:2014 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
BH GSO ASTM D2457:2015 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics
OS GSO ISO 19095-3:2017 Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 3: Test methods
GSO ISO 19095-3:2017 Plastics -- Evaluation of the adhesion interface performance in plastic-metal assemblies -- Part 3: Test methods
GSO ISO 15509:2013 Adhesives - Determination of the bond strength of engineering-plastic joints
OS GSO ISO 15509:2013 Adhesives - Determination of the bond strength of engineering-plastic joints
BH GSO EN 13892-8:2022 Methods of test for screed materials - Part 8: Determination of bond strength
OS GSO ISO 9054:2013 Cellular plastics, rigid - Test methods for self-skinned, high-density materials
BH GSO ISO 9054:2016 Cellular plastics, rigid - Test methods for self-skinned, high-density materials
GSO EN 13892-8:2021 Methods of test for screed materials - Part 8: Determination of bond strength
OS GSO ASTM D1003:2014 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
BH GSO ASTM D1003:2015 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
GSO ISO 1599:2015 Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding
GSO ISO 9653:2013 Adhesives - Test method for shear impact strength of adhesive bonds
BH GSO ASTM D2983:2012 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
OS GSO ISO 9653:2013 Adhesives - Test method for shear impact strength of adhesive bonds
GSO ISO 15908:2015 Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives

PL-PKN, Viscosity test method for plastics

PN C89408-1986 Plastics -- Determination of viscosity by Hoppler's viscometer and Hoppler's rheoviscometer
PN C89430-1993 Plastics. Guidelines for the standardization of methods for teh determination of viscosity number and limiting viscosity number of polymers in dilute solution. General conditions

International Organization for Standardization (ISO), Viscosity test method for plastics

ISO/R 1628:1970 Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers
ISO 307:1984 Plastics; Polyamides; Determination of viscosity number
ISO 307:2003 Plastics - Polyamides - Determination of viscosity number
ISO 307:2007 Plastics - Polyamides - Determination of viscosity number
ISO 307:2019 Plastics — Polyamides — Determination of viscosity number
ISO 307:1994 Plastics - Polyamides - Determination of viscosity number
ISO 12058-1:1997 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
ISO 12058-1:2018 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method
ISO 15509:2019 Adhesives — Determination of the bond strength of engineering-plastic joints
ISO 15509:2001 Adhesives - Determination of the bond strength of engineering-plastic joints
ISO 1628-4:1986 Plastics; Determination of viscosity number and limiting viscosity number; Part 4 : Polycarbonate (PC) moulding and extrusion materials
ISO 1183-2:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method
ISO/R 1183:1970 Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
ISO 1157:1975 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
ISO 1599:1990 Plastics; cellulose acetate; determination of viscosity loss on moulding

VN-TCVN, Viscosity test method for plastics

TCVN 4504-1988 Plastics.Method for determination of density
TCVN 6039-2-2008 Plastics.Methods for determining the density of non.cellular plastics.Part 2: Density gradient column method

Professional Standard - Ferrous Metallurgy, Viscosity test method for plastics

YB/T 5118-1993 Test method for strength fo fireclay and high alumina plastic refractories

SAE - SAE International, Viscosity test method for plastics

SAE J1882-1987 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)
SAE J1882-1994 METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST)

GOST, Viscosity test method for plastics

GOST R 50298.1-1992 Clay raw materials. Method of determination of plasticity

Military Standard of the People's Republic of China-General Armament Department, Viscosity test method for plastics

GJB 1059.2-1990 Phenolic Resin Test Method for Viscosity Testing of Ablative Materials

ES-UNE, Viscosity test method for plastics

UNE-EN ISO 307:2020 Plastics - Polyamides - Determination of viscosity number (ISO 307:2019)
UNE-EN ISO 8659:2021 Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020)
UNE-EN ISO 12058-1:2019 Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:2018)
UNE-EN ISO 1183-2:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)

KR-KS, Viscosity test method for plastics

KS M ISO 12058-1-2022 Plastics — Determination of viscosity using a falling-ball viscometer — Part 1: Inclined-tube method
KS M ISO 15509-2020 Adhesives — Determination of the bond strength of engineering-plastic joints

Group Standards of the People's Republic of China, Viscosity test method for plastics

T/GDPIA 1-2019 Test method for the ability to repel bacterial adhesion on the surface of plastic products

BR-ABNT, Viscosity test method for plastics

ABNT P-MB-326-1963 Test method for product saybolt viscosity testing
ABNT MB-293-1962 Test methods for kinematic viscosity testing

American National Standards Institute （ANSI), Viscosity test method for plastics

ANSI/ASTM D1823:1995 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer (08.01)
ANSI/ASTM D4878:1998 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols (08.03)
ANSI/ASTM D4508:1998 Test Methods for Chip Impact Strength of Plastics (08.03)
ANSI/ASTM D953:1992 Test Method for Bearing Strength of Plastics (08.01)

TH-TISI, Viscosity test method for plastics

TIS 1243-1994 Standard test method for viscosity of bituminous materials by vacuum capillary viscometer

國家市場監督管理總局、中國國家標準化管理委員會, Viscosity test method for plastics

GB/T 39289-2020 Determination of the adhesion strength—Plastic and metal

HU-MSZT, Viscosity test method for plastics

MSZ 10196/1.lap-1962 Viscosity detection of plastics in diluent

AASHTO - American Association of State Highway and Transportation Officials, Viscosity test method for plastics

T 72-2010 Standard Method of Test for Saybolt Viscosity
TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer

BE-NBN, Viscosity test method for plastics

NBN T 40-102-1988 Plastics - Methods for determining the density and relative density of non-cellular plastics

The American Road & Transportation Builders Association, Viscosity test method for plastics

AASHTO T 72-2010 Standard Method of Test for Saybolt Viscosity
AASHTO T 72-2010(R2019) Standard Method of Test for Saybolt Viscosity
AASHTO T 361-2022 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
AASHTO TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
AASHTO T 316-2022 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer

Taiwan Provincial Standard of the People's Republic of China, Viscosity test method for plastics

CNS 11422-1985 Method of Test for Refractoriness of Fireclay Plastic Refractories

CEN - European Committee for Standardization, Viscosity test method for plastics

EN ISO 1183-2:2019 Plastics - Methods for determining the density of noncellular plastics - Part 2: Density gradient column method

SG-SPRING SG, Viscosity test method for plastics

SS 5 Pt.B16-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B16: Determination Of Viscosity By The Brookfield Viscometer
SS 323 Pt.B1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part B1 : Determination Of Haze And Luminous Transmittance Of Transparent Plastics
SS 323 Pt.A1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part A1 : Determination Of Thickness

CU-NC, Viscosity test method for plastics

NC 30-71-1988 Plastics Industry. Determination Blocking of Plastic Films Testing Method

Society of Automotive Engineers (SAE), Viscosity test method for plastics

SAE J882-2023 Test Method for Measuring Thickness of Automotive Textiles and Plastics

国产又粗又长又大无遮挡,丰满人妻av一区二区三区,国产精品全国免费观看高,亚洲欧美国产日韩精品在线