IEC 60695-2-13:2021 RLV
火災危險試驗.第2-13部分:基于灼熱/熱線的試驗方法.材料的灼熱線點火溫度（GWIT）試驗方法

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

IEC 60695-2-13:2021 RLV 發布?xì)v史

IEC 60695-2-13:2021 RLV由國際電工委員會 IX-IEC 發布于 2021-08-24。

IEC 60695-2-13:2021 RLV在國際標準分類中歸屬于: 29.020 電氣工程綜合。

IEC 60695-2-13:2021 RLV 火災危險試驗.第2-13部分:基于灼熱/熱線的試驗方法.材料的灼熱線點火溫度（GWIT）試驗方法的最新版本是哪一版？

最新版本是 IEC 60695-2-13:2021 RLV 。

IEC 60695-2-13:2021 RLV 發布之時，引用了標準

• IEC 60695-4 著火危險試驗第4部分:電工產品著火試驗術語
• ISO 13943 消防安全——詞匯*， 2023-09-01 更新
• ISO 295 塑料.熱固性材料試樣的壓模塑法

* 在 IEC 60695-2-13:2021 RLV 發布之后有更新，請注意新發布標準的變化。

IEC 60695-2-13:2021 RLV的歷代版本如下：

• 0000年 IEC 60695-2-13:2021 RLV
• 2014年 IEC 60695-2-13:2014 著火危險試驗. 第2-13部分: 基于灼熱絲/發熱絲的試驗方法. 材料的灼熱絲引燃溫度(GWIT)試驗方法
• 2014年 IEC 60695-2-13:2010/AMD1:2014 著火危險試驗. 第2-13部分: 基于灼熱/發熱絲的試驗方法. 材料的灼熱絲燃點溫度 (GWIT) 試驗方法
• 2012年 IEC 60695-2-13:2010/COR1:2012 火災危險測試 第2-13部分:基于灼熱/發熱絲的測試方法.材料的灼熱絲起燃溫度的測試;勘誤表1
• 2010年 IEC 60695-2-13:2010 著火危險試驗.第2-13部分:基于灼熱/發熱絲的試驗方法.材料的灼熱絲著火點(GWIT)試驗方法
• 2000年 IEC 60695-2-13:2000 著火危險試驗 第2-13部分:基于灼熱/發熱絲的試驗方法 材料的灼熱絲起燃性試驗

 

This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWiT). The GW lT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This test is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire flammability index (GWFl) test method for materials, IEC 60695-2-12, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11. NOTE As an outcome of conducting a fire hazard assessment, an appropriate series of preselection flammability and ignition tests can allow a reduction of end product testing. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

標準號

IEC 60695-2-13:2021 RLV

發布

2021年

總頁數

20頁

發布單位

國際電工委員會

當前最新

IEC 60695-2-13:2021 RLV

 

 

引用標準

IEC 60695-2-10 IEC 60695-2-12 IEC 60695-4 ISO 13943 ISO 295

 

 

本體

電氣產品

IEC 60695-2-13:2021 RLV 中提到的儀器設備

IEC 60695-2-13:2021 RLV相似標準