IEC 60695-2-13:2021 RLV
火災危險試驗.第2-13部分:基于灼熱/熱線的試驗方法.材料的灼熱線點火溫度（GWIT）試驗方法

Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

預覽 IEC 60695-2-13:2021 RLV前三頁

標準號

IEC 60695-2-13:2021 RLV

發布

2021年

總頁數

20頁

發布單位

國際電工委員會

當前最新

IEC 60695-2-13:2021 RLV

 

 

引用標準

IEC 60695-2-10 IEC 60695-2-12 IEC 60695-4 ISO 13943 ISO 295

 

 

本體

電氣產品

適用范圍

This part of IEC 60695 specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWiT). The GW lT is the temperature which is 25 K (or 30 K) higher than the maximum test temperature, determined during this standardized procedure, at which the tested material does not ignite, or sustained flaming combustion does not occur for a time longer than 5 s for any single flame event and the specimen is not totally consumed. This test is a materials test carried out on a series of standard test specimens. The data obtained, along with data from the glow-wire flammability index (GWFl) test method for materials, IEC 60695-2-12, can then be used in a preselection process in accordance with IEC 60695-1-30 [4] to judge the ability of materials to meet the requirements of IEC 60695-2-11. NOTE As an outcome of conducting a fire hazard assessment, an appropriate series of preselection flammability and ignition tests can allow a reduction of end product testing. This basic safety publication focusing on safety test method(s) is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

IEC 60695-2-13:2021 RLV 中提到的儀器設備

IEC 60695-2-13:2021 RLV相似標準